TBS150ZH-1 YH00
Category: Fuel Tricycles
Product Parameters
3360×1250×1450mm
1800×1250×(350+150)mm
375 kg
2380mm
1070mm
150mm
According to customer requirements
45Units
Product Introduction
1. Engine: CG150 air-cooled, magneto 12v11 full wave DC engine
2. Oil tank: special for Q6 side cover
3. Tires: front 450-12, rear 450-12
4. Rear axle: false full floating Changan rear axle 180 brake drum (medium speed, mechanical brake) speed ratio 12:38 / 5 hole
5. Leaf spring: 800 × sixty-two × 7mm / single layer (5 pieces) grooved leaf spring
6. Front minus: φ 43 red outer spring oil pressure damping, bearing position 30 is equipped with 30206 bearings (including upper and lower connecting plates, steering handle pressure block φ 20 shaft hole, limit block (23mm long, 245mm open, 820mm long)
7. Frame: 1800x1250mm carriage / 40 × 80 keel, 185 riser, 2.5 thick / 40x60 flat frame, 2.0 thick, longitudinal beam edging 800 / built-in steel plate center distance 760 / wheel wrapping distance 1100 / 9A battery box and pressing plate / (damper center distance 610)/
8. Connect bumper
9. Trunk: 1800 × 1250mm / electrophoretic paint / 1.5mm pattern base plate / 40 × 60mm longitudinal beam edging 800 / box beam / 310mm through reinforced side plate / 40 × 40 high 150mm guardrail;
10. Tools: Five Piece Set
11. Battery: 12v9ah water
Parameter
| Main configuration of the whole vehicle | |
|---|---|
| Electric vehicle motor:Type / Voltage / Power | |
| Electric vehicle controller: Type / Voltage / MOS / Current | |
| Electric vehicle battery: Type / Adaptation Specification | |
| Electric vehicle charger: Type / Adaptation Specification | |
| Fuel vehicle: Engine displacement (CC) and heat dissipation mode | 150cc / Air Cooling |
| Fuel truck: Battery Specification | 12V9AH Lead Acid |
| Frame front keel frame: Dimension of keel / Flat frame main pipe (mm) | 40 * 60 Rectangular Tube / 40 * 60 Rectangular Tube |
| Trunk | 1.8m * 1.3m Reinforced Side Plate Car Box (with Turnover Seat Plate) |
| Front shock absorber | 43 Longbao (elevated) Hydraulic Front Reducer |
| Rear shock absorber (leaf spring) | Single Layer 62 * 7 * 5 Spring Steel Plate |
| Structure and dimensions of rear axle | Chang'an 980 Semi Floating Rear Axle (12:37 Medium Speed) |
| Afterburner gearbox and speed ratio | Nothing |
| Front and Rear Tyre Dimensions | Front 4.50-12 Rear 4.50-12 Tires |
| Front and Rear Rim Dimensions | Front 3.00-12 Rear 3.00-12 Rim |
| Structure and dimensions of front and rear brakes | Front 130 Drum Mechanical Brake / Rear 180 Drum Mechanical Brake |
| Hydraulic tipper status | Nothing |
| Other configurations | |
| Vehicle performance parameters | |
|---|---|
| Max. Velocity | 60KM/h |
| Continued Trip Mileage | 100KM |
| Loading Capacity | 800KG |
| Oil tank capacity | 14L |
| Piston Displacement | 150CC(149ML) |
| Max. Power | 8.5/8000 kw/r/min |
| Max. Torque | 10/7500 N.m/r/min |
| Economical fuel consumption | 3.3L/100KM |
| Transmission System | Shaft drive |
Exterior drawing
| Core components | |
|---|---|
![]() |
Fine Instrument |
| 50 Dragon Storm Front Shock Absorber | ![]() |
![]() |
Air Cooled 150cc Engine |
| 4.0-12 Front Tire | ![]() |
![]() |
150cc Air Cooled Engine |
| 12v9ah Lead Acid Battery | ![]() |
![]() |
150cc Air Cooled Engine |
| Engine Foot Starting Arm | ![]() |
![]() |
One Thousand And Eight Hundred × One Thousand Two Hundred And Fifty × (350 + 150) Mm Carriage |
| Core selling points | |
|---|---|
![]() |
Instrument Assembly With High Recognition |
| Zhanlong Series - Fuel Tank And Side Cover | ![]() |
![]() |
Two Thousand × 1300mm Multifunctional Trunk |
| 500-12 Durable Rear Tire | ![]() |
![]() |
5.0-12 Durable Front Tires |
| Forty × 40 High 150mm Guardrail Through Reinforcement Side Plate Carriage | ![]() |
![]() |
130 High Performance Front Brake |
| Enlarge Toolbox | ![]() |
![]() |
Comfortable 50 Dragon Storm Elevated External Spring Hydraulic Front Shock Absorber |
Structure Display
.
. 
.
.
. 
Test Display
. 
. 
Keywords: TBS150ZH-1 YH00
Previous: TBS150ZH-3 YH01
Next: TBS150ZH-A1
Related products
Product Inquiry
Please leave the information you’d like to inquire about, and we’ll get in touch with you as soon as possible.

















